80 psi Booster Pump For 300 US GPD and 450 US GPD Reverse Osmosis Systems
Get The Most Out of Your Reverse Osmosis System. This Heavy Duty Pump is a Must if Your Reverse Osmosis System is Under Performing Due to Low Water Pressure.
Very Quiet in Operation, This Pump Delivers 80 psi of Water Pressure to Your Reverse Osmosis System. The Pump is Supplied Complete With 12 Volt Transformer and Rubber Mounted Baseplate.
The 80 psi Booster Pump is Rated as Follows:
- Suitable for up to 3 X 150 US GPD Membranes in series.
- 24 Volts DC
- Flow rate 22.5 US Gallons Per Hour
- Watts 35
- Pressure 80psi
This pump is designed to be installed before the Ro Unit to boost the inlet pressure. There needs to be at least 40 psi and up to 80 psi of inlet pressure for the Reverse Osmosis Water Purification Unit to function properly.
People on wells and other situations of low pressure can benefit greatly from this pump. It boosts the pressure up to 80 psi allowing RO unit to run with higher flow and efficiency while having better TDS removal.
The 80 psi Booster Pump, specifically designed for this RO unit, is a workhorse but runs quietly. Comes cord and quick connect fittings.