|Pressure Flexible Hose Solvent Weld|
Pressure Flexible Hose is a very strong, thick walled PVC based hose that is reinforced for extra strength. It can not be crushed and is very difficult to damage or distort. Designed to be solvent welded into metric and imperial pressure pipe fittings and is therefore ideal where difficult, complex pipe runs are necessary. Ideal for underground as well as above ground applications. Will not split or go brittle with time.
- Very Flexible, ideal for working in confined areas. Crush and impact resistant.
- Reduces the number of required fittings and permits the installer/user to make smooth, tight turns, thus, saves time, labor and cost.
- Uses standard pressure pipe fittings and PVC Glue and can be connected to rigid PVC with ease.
- UV and chemical resistant, Coils easily for storage and transportation
- Smooth inside and out, permits unrestricted flow, reducing operating costs.
- Precision outside diameter is designed to be glued into standard pressure pipe fittings.
Our Grey Pressure Flexible PVC Pipe is perfect for use with ponds and other applications where the use of rigid pipe is either not practical or not desirable. Strong and long lasting this hose is extremely flexible and can easily be routed in any direction necessary without the use of multiple fittings, thus simplifying plumbing layouts and the installation of your job.
It can be used in areas where space is limited and or in situations that simply will not accommodate rigid pipe. Our Flexible PVC Pipe easily conforms to almost any contour. A rigid internal PVC spiral (helix) resists crushing and impact issues and this PVC pipe can be used for above-ground or under ground installations.
With a precision controlled outside diameter, it can be easily glued using standard pressure pipe fittings and any good, commercially available PVC glue for flexible or rigid PVC. It eliminates back pressure caused by sharp turns created by multiple fittings, which increases the efficiency of your system and lowers your overall operating/energy cost. Each fitting eliminated with this highly flexible pipe is one less fitting that can fail and cause your system to leak. It also coils easily for storage and transport.
It is specifically designed for use in the installation and maintenance of ponds, pools, watering systems, spas, hot tubs, swimming pools, irrigation, drain lines and other similar water transfer applications where flexibility and ease of use is demanded.
PLEASE NOTE: We recommend using Griffon WDF-05 Wet & Dry Fast Curing Cement with the Pressure Flexible Hose Solvent Weld and fittings.
You will need to glue the Converter Socket listed below on to the end of the grey pressure flexible pipe to get back on to Grey Pressure pipe and fittings.
|Item #|| Description ||Price ||Add to Cart|
|FH768||Flexible Hose Solvent Weld 50 mm per meter||£4.95 ||Add to Cart|
|FH769||Flexible Hose Solvent Weld 63 mm per meter||£5.95 ||Add to Cart|
|PW679||1.5 inch x 50 mm Converter Socket||£3.95 ||Add to Cart|
|PW707||2 inch x 63 mm Converter Socket||£4.95 ||Add to Cart|
|LS1023||Griffon WDF-05 Wet & Dry Fast Curing Cement 250 ml||£8.95 ||Add to Cart|