Aqua Master Combo Pen P160 Pro
The Aqua Master Combo pen P160 Pro is a pH, EC, TDS, PPM, Temp meter all in one.
The updated Combo Pen P160 Pro features a modern and robust housing. The major advantage of this model is its analogue EC calibration. This means that the calibration solution does not need to have a temperature of exactly 25ºC.
The Aqua Master Combo pen P160 Pro is a pH, EC, TDS, PPM, Temp meter all in one.
The updated Combo Pen P160 Pro features a modern and robust housing. The major advantage of this model is its analogue EC calibration. This means that the calibration solution does not need to have a temperature of exactly 25ºC.
Calibration takes place without any deviations. EC buffer solutions are extremely sensitive to temperature. However, this does not apply to pH. You can easily replace the electrode should it be worn or damaged. This model comes in a robust case, including pH 4.01, pH 7.00 and EC 1413 buffer solutions, allowing you to calibrate the meter at a later time.
The Combo Pen P160 Pro is ideal for measuring the pH, EC, PPM, TDS, and temperature of your water in your koi ponds. The user-friendly buttons can be used to effortlessly switch between the parameters. The meter is delivered fully calibrated and includes batteries.
How does the meter work?
- Remove the protective cover.
- Gently clean the electrode with distilled water and dry it off.
- Press the On/off button to start the meter.
- Insert the meter upright into the solution up to the edge and stir gently. Wait a few seconds for the correct value to appear on the display.
- Press the Temp/CAL button, to switch between Celsius and Fahrenheit.
- Press the PH/EC button to switch between pH and EC.
- Make sure the meter is in EC mode to switch between EC, TDS and PPM. Press and hold the PH/EC button for at least 5 seconds to switch parameters.
- Rinse the electrode with water after use and press the On/off button to turn off the meter.
Our electrodes are designed for dry storage. Therefore, storage in liquid is not required for the electrode.
The The Aqua Master Combo pen P160 Pro package contains:
1 x Combo Pen P160 Pro
1 x Storage box
1 x Buffer solution pH 7.00 25ml
1 x Buffer solution pH 4.01 25ml
1 x Buffer solution 1413 25ml
1 x Screwdriver for calibration
1 x User manual (NL - EN - DE)
The Aqua Master Combo pen P160 Pro is a pH, EC, TDS, PPM, Temp meter all in one.
The updated Combo Pen P160 Pro features a modern and robust housing. The major advantage of this model is its analogue EC calibration. This means that the calibration solution does not need to have a temperature of exactly 25ºC.
Calibration takes place without any deviations. EC buffer solutions are extremely sensitive to temperature. However, this does not apply to pH. You can easily replace the electrode should it be worn or damaged. This model comes in a robust case, including pH 4.01, pH 7.00 and EC 1413 buffer solutions, allowing you to calibrate the meter at a later time.
The Combo Pen P160 Pro is ideal for measuring the pH, EC, PPM, TDS, and temperature of your water in your koi ponds. The user-friendly buttons can be used to effortlessly switch between the parameters. The meter is delivered fully calibrated and includes batteries.
How does the meter work?
- Remove the protective cover.
- Gently clean the electrode with distilled water and dry it off.
- Press the On/off button to start the meter.
- Insert the meter upright into the solution up to the edge and stir gently. Wait a few seconds for the correct value to appear on the display.
- Press the Temp/CAL button, to switch between Celsius and Fahrenheit.
- Press the PH/EC button to switch between pH and EC.
- Make sure the meter is in EC mode to switch between EC, TDS and PPM. Press and hold the PH/EC button for at least 5 seconds to switch parameters.
- Rinse the electrode with water after use and press the On/off button to turn off the meter.
Our electrodes are designed for dry storage. Therefore, storage in liquid is not required for the electrode.
The The Aqua Master Combo pen P160 Pro package contains:
1 x Combo Pen P160 Pro
1 x Storage box
1 x Buffer solution pH 7.00 25ml
1 x Buffer solution pH 4.01 25ml
1 x Buffer solution 1413 25ml
1 x Screwdriver for calibration
1 x User manual (NL - EN - DE)
Standard Delivery Monday to Friday, via DPD or APC
You will receive from our courier tracking details once your item has been despatched, please ensure you check your email / mobile number to monitor your parcel in transit.
Delivery costs for standard items in the UK - £5.95
(Surcharges do apply to remote postcodes)
Heavy items - £9.95
Pipe - £14.95
Larger items:
Palletised items - Some large oversize products, typically items weighing more than 30kg, may require delivery via pallet. Standard Pallet charge is approx. £50.00. To ensure there are no delays with delivery, please include a contact number when placing the order.
Overseas – DHL and UPS, cost based on weight / volume at checkout.
Damages
Although we check that items we send are in good condition before despatched and are packed well to prevent damage, it is sometimes inevitable that the occasional item will get broken in transit.
Should this happen, please let us know within 24 hours of receiving your parcel. We will ask you to email us providing some images of the damage so we can address this with the courier.
We will arrange for a replacement to be sent out to you as quickly as possible, free of charge.
Below is a list of documents that you may find useful.
Can’t find what you’re looking for? Call 01777 839176 or use our contact form
