Easter Bank Holiday open 10am until 3pm.  CLOSED Easter Sunday.  

We are open 7 days a week, 9am to 5pm Monday to Friday & 10am until 3pm weekends (Winter Hours and Bank Holidays vary) 

Winter offers - Get 10% off all Evolution Aqua products, use code GET10 at checkout.

Elecro Nano Cygnet Aquatic Heater 3 kw

PH0099

The Elecro Nano Cygnet Aquatic Heater 3 kw is specifically designed to ensure maximum safety, reliability and efficiency, the Cygnet Aquatic heater is user-friendly and offers “plug & play” installation for the 1-kW to 4-kW models. The thermostat dial gives you control over the desired pond temperature, while the thermal cut-out protects against over-heating.

£435.00
- +
In stock

The Elecro Nano Cygnet Aquatic Heater 3 kw is specifically designed to ensure maximum safety, reliability and efficiency, the Cygnet Aquatic heater is user-friendly and offers “plug & play” installation for the 1-kW to 4-kW models. The thermostat dial gives you control over the desired pond temperature, while the thermal cut-out protects against over-heating.

Elecro Nano Cygnet Features & Benefits

  • Various power options ranging from 1-kW to 4-kW
  • Easy installation, fully equipped and pre-wired
  • Robust, durable construction
  • Ultra-reliable flow switch allows safe operation
  • Supplied with temperature thermostat and overheating sensor
  • Compact, durable design
  • Analogue control with 1.2°C differential
  • Titanium flow tube and titanium heating element
  • Can be floor or vertically wall mounted
  • Vortex, long life, stay clean heating element technology
  • 100% efficiency throughout the product life
  • Silent operation

The Elecro Nano Cygnet Aquatic Heater is specifically designed to ensure maximum safety, reliability and efficiency, the Elecro Cygnet Aquatic heater is user-friendly and offers ‘plug & play’ installation for the 1 kw through to 4 kw models.

The 4-kW model is supplied with a power cord but must be installed by a qualified electrician; it cannot be connected to a 3-pin plug. The thermostat dial gives you control over the desired pond temperature, while the thermal safety cut-out protects against over-heating.

The Elecro Nano Cygnet Aquatic Heater is designed and manufactured in Hertfordshire, England to the highest specification, the Elecro Cygnet Aquatic Heater features our unique and proven coiled heating element technology, whereby a turbulent vortex is created in the water flow. This delivers outstanding efficiency and extended life expectancy by preventing build up of mineral deposits on the heating element, which are specifically designed for pond/aquatic applications.

Elecro Nano Cygnet Aquatic Heater is consists of a flow tube which is fitted with Inlet and Outlet mouldings manufactured from specially formulated polymer alloy material. The outlet moulding accommodates a flow switch with a gold tipped reed, and Titanium fulcrum pin, whilst the inlet moulding has been designed to ensure full immersion of the element, greatly reducing the risk of air locking.

The Elecro Nano Cygnet Aquatic Heater can be vertically wall-mounted or stand on the floor with the control components on the top facing case. Screw fit adapters are supplied to allow connection to standard 1.5 inch or 1.25 inch flexible pipe work.

The desired pond temperature can be easily set on the Elecro Nano Cygnet heater using the panel-mounted thermostat dial. Safety and equipment protection is provided by the highly reliable flow switch and over-heating protection is provided by the thermal cut out with manual reset.

Specification
Heater Type Inline

Power Supply: 220-240V single phase


Minimum flow Requirements: 1m³/h


Maximium Maximum flow: 17m³/h


Heating Element: Grade 1 titanium


Flow Tube: Grade 1 titanium


Control Thermostat: Analogue: 0>45°C (1.2°C differential)


Safety Thermal Cut Out: 60°C (manual reset)


Flow Switch: Gold tipped reed switch with titanium fulcrum pin


Relay: Surface mount DPDT Finder 66.82.8.230.0000


Seals: High temperature special formula EPDM ferrules, TPE end fitting gaskets


Water Connections: 1.5″ BSP female thread supplied with 1½” / 50mm stepped ABS unions for rigid pipe and 1½” / 1¼” stepped hose tails for flexible pipe


Ingress Protection Rating: IP44


Frequency: 50/60 Hz


Working Pressure: 4 bar maximum


Mounting: Floor or wall mounting

We aim to dispatch orders received before midday Monday to Friday on the same day where possible. In most cases our items are available for 1 to 2 day delivery at a competitive price and are trackable via DPD or APC.

Delivery costs for standard items in the UK - £5.95

(Surcharges do apply to remote postcodes)

Heavy items - £9.95

Pipe - £14.95

Palletised items - Some large oversize products, typically items weighing more than 30kg, may require delivery via pallet. Standard Pallet charge is approx. £50.00. To ensure there are no delays with delivery, please include a contact number when placing the order.

Overseas – DHL and UPS, cost based on weight / volume at checkout.

Below is a list of documents that you may find useful.

Can’t find what you’re looking for? Call 01777 839176 or use our contact form