We are open 7 days a week.  9am to 5pm Monday to Friday and 10am until 3pm weekends.

Covid restrictions remain in our shop to protect you and our staff, thank you.

Welcome to our new website, its far from finished but we are working hard, please bear with us.

Elecro Nano Koi Pond Heater Titanium 3 kw (White Enclosure)

PH0102
Description

Elecro Nano koi pond heater

The Elecro Nano koi pond heater is manufactured from top quality components and materials.

Construction of Elecro Nano koi pond heater consists of a flow tube which is fitted with Inlet and Outlet mouldings manufactured from specially formulated polymer alloy material. The outlet moulding accommodates a reversible flow switch with a gold tipped reed, and Titanium fulcrum pin.

£375.00
- +
In stock

Elecro Nano koi pond heater

The Elecro Nano koi pond heater is manufactured from top quality components and materials.

Construction of Elecro Nano koi pond heater consists of a flow tube which is fitted with Inlet and Outlet mouldings manufactured from specially formulated polymer alloy material. The outlet moulding accommodates a reversible flow switch with a gold tipped reed, and Titanium fulcrum pin.

The Elecro Nano koi pond heater is supported on two feet, this permits either vertical wall or floor mounting.

The heater control components are positioned on the top face of the casing. Screw fit adapters are supplied to allow connection to standard above ground pool flexible pipe work. The water inlet and outlet fittings can facilitate connection to either metric or imperial standard pipe.

The inlet moulding has been designed to ensure full immersion of the elements, greatly reducing the risks of air locking.
Operation


Elecro Nano koi pond heater Features:https://koicarp.co.uk/UserFiles/nanowhitevert.jpg

  • Robust, durable construction
  • Easy Installation
  • Titanium or Incoloy 825 heating element
  • 316 Stainless Steel flow tube
  • Ultra-reliable flow switch allows safe operation as low as 1m³/hour
  • Control thermostat 0-40°C (1°C differential)
  • Safety thermal cut our 60°C (manual reset)
  • Supplied with hose tails for connections to 1¼" or 1½" flexible pipe
  • ideal Heat Pump Top Up / Back Up Heater
  • 3-kW Power Output
  • Complete With Power Lead
  • Analogue Control Thermostat
  • Reversible Flow Switch


The desired pond temperature can be easily set on the Elecro Nano heater using the panel-mounted thermostat dial.


Safety and equipment protection is provided by the highly reliable flow switch.


Over-temperature protection is provided by the thermal cut out (manual reset).


Elecro Nano koi pond heater Technical Spec:

Minimum Flow Requirement: 1m³ (1,000-litres) per hour
Maximum Flow Velocity: 17m³ (17,000-litres) per hour
Heating Element: Incoloy 825 (Yellow Enclosure) or Titanium (White Enclosure)
Flow Tube: BS 316 Stainless Steel
Control Thermostat: 0ºC > 40ºC (1.0ºC Differential)
Safety Thermal cut-out: 55ºC (Manual reset)
Flow Switch: Gold tipped reed switch with Titanium fulcrum pin
Wiring: High temperature, silicone sheathed, multi-strand copper conductors
Seals: High temperature special formula polymer
Working Pressure: 4 bar maximum
Water Connections: 1½" BSP female thread
Supplied Hosetails: For 1½" / 1¼" flexible pipe
Mounting: Floor or wall mountable

 

 

https://koicarp.co.uk/UserFiles/nano.jpg