Kusuri Hydrogen Peroxide 6 %

Kusuri Hydrogen Peroxide 6 %

Kusuri Hydrogen Peroxide 6 % can be used for cleaning up the effects of potassium permanganate, after the use of potassium permanganate in the pond we are left with a thick looking brown stain to the water, which in some cases can take up to 6/7 days to clear.

The application of Kusuri Hydrogen Peroxide 6 % at 10 ml to 150 gallons of pond water will quickly act upon the potassium permanganate to clear the pond in a very short space of time so it becomes gin clear again. Again this is only needed if you really can't stand the sight of the residual brown staining of the water from the use of potassium permanganate.

If you get into a potassium permanganate overdose situation and the koi are looking really stressed the above dose will quickly neutralise the oxidising effects of potassium permanganate rendering a stressed koi, free from any adverse effects of a potassium permanganate overdose treatment.

Be warned hydrogen peroxide even after a single dose is deployed into the pond to neutralise potassium permanganate will still be resident for some three to four days after deployment. I.E. if further potassium permanganate doses are required several days will be needed for Kusuri Hydrogen Peroxide 6 % to decay out of the pond, or it will quickly render potassium permanganate useless.

Kusuri Hydrogen Peroxide 6% Solution is used for the re-oxygenation of pond water after a treatment of Kusuri Potassium Permanganate. Hydrogen Peroxide 6% can be used to increase the oxygen levels and remove the discolouration from pond water after a course of Kusuri Potassium Permanganate has oxidized from pink to brown. Hydrogen Peroxide 6% can also be very useful when applied to pond water prior to the removal of sludge and detritus. The hydrogen peroxide will neutralize hydrogen sulphide realised from the sludge and detritus being removed.

• 500ml treats 20,003 litres (4,400 gallons) of pond water

• 1 litre treats 40,006 litres (8,800 gallons) of pond water

Dosage

Use 25ml per 1004 litres (220 gallons) of pond water. Add Hydrogen Peroxide directly to the pond water over a 1 hour period. In an emergency situation, add the Hydrogen Peroxide around the outside of the pond over a few minutes to aid in broadcasting the treatment. 

How To Use

Shake well before use. Measure the correct dosage. Tighten cap after use.

Health And Safety

Store in original container between 5°C and 25°C. Keep out of reach of children. For animal pond water treatment only. Always wear protective gloves and goggles when handling chemicals. Use within 3 months of opening.