NT Labs Formaldehyde
NT Labs Formaldehyde treats: White spot, Trichodina, Costia and Chilodonella.
-
Cloverleaf Absolute Parasite PlusStarting at £39.95
-
Surgical Kit£34.95 -
Colombo Morenicol Vita Spray£19.99 -
Kusuri Fluke M x 2 - 130 gsm£49.99
NT Labs Formaldehyde treats: White spot, Trichodina, Costia and Chilodonella.
When to use NT Labs Formaldehyde
When fish show symptoms of a parasitic infection, including white spots along the fins and body, flicking and rubbing, gasping at the surface, or an opaque film over the body.
Formaldehyde is highly effective at treating parasites due to its ability to penetrate through the mucus layer, reaching those parasites which would otherwise be protected from alternative bath treatments. It can also be used in conjunction with Malachite to treat protozoan parasites more effectively.
How to use NT Labs Formaldehyde
- Test your water quality using NT Labs Test Kits.
- Mix the appropriate dosage in a clean bucket of pond water, pour evenly over the surface of the pond and leave for 7 days. Switch off UV filtration for 5 days. Aerate the pond well during treatment.
- If you feel a repeat dose is necessary, check your diagnosis carefully using the Diagnosis Tool; a different medication may be more suitable. Allow 7 days and perform a partial water change before re-treating or treating with a different medication.
- Always treat when you have time to observe fish and take appropriate action in the unlikely event of a bad reaction.
If required, mix with Malachite prior to adding to the pond, following the instructions above.
Warning:
Do not use with orfe, rudd, tench or sturgeon/sterlet. Do not use if the water temperature is above 30°C. Do not use in hot, humid, thundery conditions. Do not mix medications, other than combining with Malachite.
NT Labs Formaldehyde can be used as a dip bath to treat severe cases quickly. For the bath add 1ml to 1 gallon of pond water and bathe the fish for 1 hour. Aerate the water and watch for signs of stress.
Caution: Formaldehyde is a hazardous chemical and should be handled with great care, please read the warnings on the label carefully.
250 ml treats 17048 litres (3750 gallons)
Standard Delivery Monday to Friday, via DPD or APC
You will receive from our courier tracking details once your item has been despatched, please ensure you check your email / mobile number to monitor your parcel in transit.
Delivery costs for standard items in the UK - £5.95
(Surcharges do apply to remote postcodes)
Heavy items - £9.95
Pipe - £14.95
Larger items:
Palletised items - Some large oversize products, typically items weighing more than 30kg, may require delivery via pallet. Standard Pallet charge is approx. £50.00. To ensure there are no delays with delivery, please include a contact number when placing the order.
Overseas – DHL and UPS, cost based on weight / volume at checkout.
Damages
Although we check that items we send are in good condition before despatched and are packed well to prevent damage, it is sometimes inevitable that the occasional item will get broken in transit.
Should this happen, please let us know within 24 hours of receiving your parcel. We will ask you to email us providing some images of the damage so we can address this with the courier.
We will arrange for a replacement to be sent out to you as quickly as possible, free of charge.
