Tank Connectors
The Heavy-duty PVC Grey Pressure tank connectors are suitable for use with quarantine Tanks, these tank connectors can also be used as side outlets in the construction of pond filters to connect up to slide valves or ball valves.
Threaded tank Connectors are very useful for that awkward job. These have a 40 mm, 50 mm and 110 mm threaded male with a plain solvent weld socket on the other end, they can be used putting drain off valves in filters or return's in to Quarantine tanks. The 110 mm Threaded Tank connectors can be used for inlet/outlet ports between chambers.
All our flanged tank connectors are supplied with self tapping stainless steel screws and are therefore ideally suited for total immersion under water.
The Radial Tank connector is ideally suited for placement on the contoured surfaces such as a vortex, where the radial shaped design, contours snugly onto the outside surfaces leaving a close fit for final sealing of the 110 mm outlet port.
We are now able to supply the new flanged tank connectors in Grey PVC pressure pipe. As with the black waste tank connectors these new PVC ones are also complete with self tapping stainless steel screws and are therefore ideally suited for total immersion under water.
Reducing Sleeves, or inserts as many people call them, are to reduce the internal sizes of a particular pipe to enable a slightly smaller pipe to fit the connection, whether that connection is to a socket, bend or some other fitting - they should, of course, be solvent welded into place prior to the actual pipe connection being made.
Our Tangential Pond Return fittings are perfect for concrete or liner installations as they have a wider flange for better liner grip then most other brands. All Tangential Pond Return have a pipe Length of 370 mm.