We are open 7 days a week.  9am to 5pm Monday to Friday and 10am until 3pm weekends.

Covid restrictions remain in our shop to protect you and our staff, thank you.

Welcome to our new website, its far from finished but we are working hard, please bear with us.

Reducing Sleeves (Pressure to Waste)

Description

These Reducing Sleeves, or inserts as many people call them, are to reduce the internal sizes of a particular pipe to enable a slightly smaller pipe to fit the connection, whether that connection is to a socket, bend or some other fitting - they should, of course, be solvent welded into place prior to the actual pipe connection being made.

Grouped product items
Product Name Quantity
1 1/2 inch Reducer (Imperial Pressure To 40 mm Solvent Waste)(PW0036)
£1.50
- +
2 inch Reducer (Imperial Pressure To 50 mm Solvent Waste)(PW0037)
£2.00
- +
3 inch Reducer (Imperial Pressure To 82 mm Solvent)(PW0038)
£2.50
- +
4 inch Reducer (Imperial Pressure To 110 mm Solvent Waste)(PW0039)
£3.00
- +

Starting at £1.50

In stock

These Reducing Sleeves, or inserts as many people call them, are to reduce the internal sizes of a particular pipe to enable a slightly smaller pipe to fit the connection, whether that connection is to a socket, bend or some other fitting - they should, of course, be solvent welded into place prior to the actual pipe connection being made.

Reducing sleeves enable the use of ball valves, slide valves and other fittings with solvent weld waste piping as well as PVC pressure pipe. Simply glue over the end of the solvent weld pipe before fitting to the appropriate valve or fitting. One required for each side of the valve.