Open 7 days a week, 9am to 5pm Monday to Friday & 10am until 3pm weekends (Winter Hours and Bank Holidays vary) ** 29th and 30th June 10am till 2pm due to the National show ** 

Come and see us at the BKKS National Koi Show 29th and 30th June, Heart of England Centre, CV7 8DX

Summer offers - Get 10% off all Evolution Aqua products, use code GET10 at checkout.

Remora Professional 35 - 41.15 kw Inverter Heat Pump with Wi-Fi

Remora Professional 35 Inverter Heat Pump with Wi-Fi

Everything about the Remora Professional says quality, whether it’s the performance, the engineering or the controls – put it all together and you’ve got a heat pump that looks every bit as good as it performs.

The Remora Professional 35 Inverter Heat Pump with Wi-Fi with is a premium quality heat pump for pools and Koi ponds, intelligent design maximises heat output and minimises energy consumption, while Wi-Fi connectivity allows control from your smart device, wherever you are.

£6,980.00
- +
In stock

Everything about the Remora Professional says quality, whether it’s the performance, the engineering or the controls – put it all together and you’ve got a heat pump that looks every bit as good as it performs.

The Remora Professional 35 Inverter Heat Pump with Wi-Fi with is a premium quality heat pump for pools and Koi ponds, intelligent design maximises heat output and minimises energy consumption, while Wi-Fi connectivity allows control from your smart device, wherever you are.

Our unique partnership with the manufacturer of our Remora heat pumps allows us to deliver the performance and features our customers want, the result is a range of heat pumps that deliver exceptional COP and heating efficiency, the Remora Professional Inverter range introduces our first 14kW plug and play model and a new 35kW model at the top of the range.

Matching the Remora Professional’s performance, are the highest levels of British quality control and engineering, the powder coated steel case features a cut out fan grill adding to the already sleek and stylish design, the patented, flush fit touch control LCD screen is fully waterproof and requires no additional cover, the full colour display offers precise digital read outs and the heat pump is controllable via Wi-Fi using Smart Life App.

The Remora Professional features external control (subject to connection to a suitable Wi-Fi network), allowing remote access to the heat pump for changing parameters and diagnosing running issues, this removes the need for an engineer to attend site or for customers to self-diagnose issues, advanced parameters allow for all aspect of the heat pumps running to be tailored to your requirements.

The full stepless DC Inverter system allows the Remora® Professional to be responsive and efficient, choose Boost mode to deliver fast heating, Silent mode for night time running, Eco for the most efficient running or simply leave in Smart mode for intelligent day to day heating or cooling of your pool or pond, all selectable at the touch of a button.

Our 8kW, 10kW and 14kW Remora® Professional heat pumps come fitted with mains cable, RCD and plug as standard, making them suitable for outdoor sockets, the other models in the range will require electrical installation by a qualified electrician.

  • Three year parts and labour warranty
  • Seven year (total) parts warranty on the compressor and heat exchanger
  • External Control allows remote access to diagnostics and parameters
  • Remora brand is exclusive to Automated Environmental Systems

Key Features of the Remora Professional 

  • Wi-Fi connectivity built-in* – control your Remora Professional from your smart device, from anywhere in the world, using Smart Life App
  • Preset modes; Boost mode maintains high heat output for fastest heating, Silent mode for night time running, Eco mode for most efficient running and the intelligent Smart mode for maximum flexibility
  • User-friendly high end touch screen controller, flush fitting colour LCD
  • High quality matt finish powder coated galvanised steel casing with integral fan outlet and heat exchanger inlets
  • 8kW, 10kW and 14kW models come fitted with 2.8m mains cable and UK RCD plug
  • Power usage log shows how much energy has been consumed in each running mode
  • Advanced Parameters for full control of heat pump settings, running status and fault history
  • Automatic software update via internet (no need for engineer to callout to update)
  • External Control allows remote access to diagnostics and parameters for resolving setup issues and potential fault finding
  • Timer operation and secondary Silent mode timer, ideal for night time running
  • Heats and cools
  • Extended season model works down to -15°C, automatic hot gas defrosting
  • 1½ inch female threaded or female glue socket water connections
  • High efficiency performance with advanced stepless DC inverter system that automatically controls the running speed of the compressor and the fan
  • Low noise airstream design for very quiet operation, average sound level <30 dB(A) at 10 metres
  • Stepless twin rotary inverter compressor and DC brushless fan motor
  • EEV throttling technology adjusts the gas flow and increases COP by up to 20%
  • Spiral Titanium heat exchanger is 40% more efficient than standard titanium heat exchanger
  • R32 gas for environmentally friendly operation
  • Winter cover included (excluding Professional 35)

Ideally suited for Koi ponds

  • Wide range of set points from 2°C to 40°C (according to application)
  • Swing temperature of 1°C
  • 13A RCD plug on 8kW, 10kW and 14kW models allows you to plug units directly into outside sockets without need for additional electrical connections
  • Inverter model is suitable for all year round heating / cooling
  • Remote input for external third party thermostatic management, for example PRO On/Off Temperature Controller.
Specification
Heater Type Air Source

Remora Professional 35 Specifications

Heating Capacity A27/W27:  20.15 ~ 41.15 kW

Max. Input Power: 4.5 ~ 7.43 kW

Heating Capacity A15/W26: 13.92 ~ 33.72 kW

Max. Input Power: 2.1 ~ 7.45 kW

Max. Current:  36.0A

Minimum Fuse (C Type MCB): 40A

COP A27/W27: 6.78 ~ 15.02

COP A15/W26: 5.2 ~ 8.05

Voltage: 230V

Refrigerant: R32

Noise Level (10m) <45db

Fan Direction: Twin Horizontal

Nominal Flow: 17~20m³/h

Water Connections: 1½ inch

Dimensions (L x W x H) 1170mm x 451mm x 1389mm

Weight: 138Kg

Wi-Fi Connectivity: Built-in* (Requires Smartphone App)

 

Heat loss

Your pool should be covered when you are not swimming as 80% of heat loss occurs through surface evaporation. If you have an above ground pool it is especially important to keep it covered as these pools are not well insulated against heat loss – additional insulation underneath and around the sides of an above-ground pool can help to retain valuable heat.

If your pool did not come with a cover then a separate solar cover would be a worthwhile investment, otherwise any heat generated by the heat pump could be lost through surface evaporation and you will struggle to achieve your required temperature.

 

Connecting your heat pump

The 8kW, 10kW and 14kW models come fitted with a 2.8m mains cable, RCD and plug as standard, making them suitable for outdoor sockets, this cable can be removed and the unit can be hardwired if required.

The other heat pumps in the range will require electrical installation by a qualified electrician, the use of a Miniature Circuit Breaker, slow type (C or D curve) is recommended. Full installation guidelines can be found in the user manual including the required cable size.

The electrical connection marked water pump should not to be used for connecting your pump if using a sand filter as flow protection on the heat pump will switch the power off preventing backwash operation (flow is reversed during backwashing).

Water inlet and outlet connections are 1½ inch across the range, the supplied glue socket unions can be easily replaced with optional hose tails for connecting 32mm or 38mm flexible hose.

If the flow rate through your heat pump is too high it can take longer to heat your pool or you may struggle to achieve your desired temperature, our bypass kit for above ground pools optimises the flow rate to maximise the heat transfer to your pool water. A bypass kit also allows the circulation and filtering of pool water without heating and for winterising your heat pump.

 

Wi-Fi control

The Remora® Professional swimming pool heat pump features built-in Wi-Fi connectivity as standard (requires Wi-Fi network with suitable signal strength) and can be controlled from your smart device from anywhere in the world. The Smart Life App is available for both iOS and Android smart devices.

The Smart Life App can be used to view the current pool water temperature, adjust the desired temperature, switch between modes, set the timer, turn the heat pump on and off remotely and to view the operating status, energy logs and all parameters.

Inverter technology

Inverter heat pumps use a variable speed compressor motor, the motor speeds up and slows down as needed to achieve and maintain the required temperature, the result is that the desired temperature will be reached more quickly and maintained more efficiently than a fixed speed motor.

Fixed speed motors reach the desired temperature more slowly as the output is fixed, once the temperature is reached they maintain the temperature by switching the motor on and off. By varying the output an inverter heat pump can speed up the time taken to achieve the initial temperature and thereafter maintain a constant temperature without the need to keep stopping and starting the compressor to control output.

Our range of Remora® Professional pool heat pumps have an average C.O.P. of 17.55, meaning that for each kW of energy consumed up to 17.55kW of heat is transferred to your pool (dependent on both air and water temperature). Inverter technology avoids the power wastage of fixed speed motors, making an inverter heat pump more energy efficient and quieter to run.

Situating your heat pump

Your Remora® Professional swimming pool heat pump should always be installed outside, restrictions on air flow around a heat pump such as dense vegetation or solid surfaces such as sheds, fences or walls will lead to a drop in efficiency and heating ability, it especially important that cooled air can be properly dispersed away from the unit.

If you have an above-ground pool please position your heat pump at ground level (therefore below the waterline), there is no need to elevate the heat pump.

What is COP?

When deciding which heat pump to buy you will very often hear or see a COP number being quoted, this COP number indicates how efficient a heat pump is.

The COP, which stands for Coefficient of Performance, is the ratio between the power input of a heat pump and the amount of heat that is output (both normally measured in kW’s).

If a heat pump has a COP of 10, this means that for every kW of electricity used to power the heat pump then 10kW of heat will be returned to your pool or pond.

Put simply, the higher the COP of a heat pump, the higher the heat output and the lower the running costs.

We aim to dispatch orders received before midday Monday to Friday on the same day where possible. In most cases our items are available for 1 to 2 day delivery at a competitive price and are trackable via DPD or APC.

Delivery costs for standard items in the UK - £5.95

(Surcharges do apply to remote postcodes)

Heavy items - £9.95

Pipe - £14.95

Palletised items - Some large oversize products, typically items weighing more than 30kg, may require delivery via pallet. Standard Pallet charge is approx. £50.00. To ensure there are no delays with delivery, please include a contact number when placing the order.

Overseas – DHL and UPS, cost based on weight / volume at checkout.

Below is a list of documents that you may find useful.

Can’t find what you’re looking for? Call 01777 839176 or use our contact form