Pond Filtration >> Nexus Eazy

Nexus Eazy 200

The Nexus Eazy 200  is Evolution Aqua's exciting new filter system incorporating the industry proven Kaldnes moving bed coupled with the innovative Eazy mechanical filter. The Nexus Eazy 200 provides outstanding water clarity and quality, pump or gravity fed. It is extremely Eazy and "clean" to maintain, minimal running costs, requires no service parts such as foam, is designed and built to last for life as well as offering unrivalled price performance.

How it works:
The Nexus Eazy 200 incorporates is a stainless steel vessel containing a volume of static K1 media which is located within the centre chamber of the Nexus Eazy 200. Water enters the centre chamber and then enters the Nexus Eazy Eazy via slots in the lower half of the unit. This results in a downward flow causing many of the larger solids to settle out prior to entering the Nexus Eazy 200. The size of the slots will not allow large mechanical waste to enter the cylinder thus acting as a first stage mechanical filtration. The water then passes through the static K1 media utilizing up and side flow and this process causes the fine solids to become entrapped. The mechanically clean water then passes to the outside chamber of the Nexus Eazy 200 where the Kaldnes moving bed is located for biological treatment prior to being returned to the pond.

Maintenance
The Nexus Eazy 200 is extremely easy and pleasurable to clean. The water pump is switched off and an air valve is operated which diverts air from the main Nexus eazy 200 air ring into the base of the Nexus Eazy. This causes the K1 media to be agitated and cleaned vigorously. As this happens the captured particles are flushed out into the central chamber of the Nexus Eazy 200, allowing you to see the amount of waste that has been filtered out. Once the K1 media has been agitated for a sufficient period, the water in the central chamber is flushed to waste using the purge valve provided at the base of the Nexus Eazy 200. Once clean, the air flow is re-directed back to the main air ring and the system started again. The whole process from start to finish can take less than two minutes.

The Eazy features Evolution Aqua's new solids removal system utilising static Kaldnes. The Kaldnes is retained in a 316 stainless steel enclosure and has been proven to trap incredibly small waste particles, without disrupting flow through the system. 

Cleaning the Kaldnes is a simple matter of turning on the air tap to the settlement area, thus agitating the static Kaldnes.  Waste is then dislodged from the media, and purged through the central vortex drain.

• Maximum recommended pond size: 7500 gallons
• Maximum flow rate: 13,000 litres / 2,800 UK gallons per hour
• Kaldnes K1 media: 100 litres included (Maximum K1 capacity 200 litres)
• Recommended air pump: 40 or 80 lpm
• Maximum dimensions: 1.44m x 1.33m x 1.07m deep

Upgrade your existing Nexus 200 or 300 with the Eazy retro fit kit. Out with the old foam block and in with the Eazy it's that easy.

Upgrade your existing central sponge block to the new Nexus Eazy.  The Eazy features Evolution Aqua's new solids removal system utilising static Kaldnes. The Kaldnes is retained in a 316 stainless steel enclosure and has been proven to trap incredibly small waste particles, without disrupting flow through the system.  Cleaning the Kaldnes is a simple matter of turning on the air tap to the settlement area, thus agitating the static Kaldnes.  Waste is then dislodged from the media, and purged through the central vortex drain.

The Nexus Eazy 200 retro kit inlcudes all the necessary parts, plus 35 litres of Kaldnes media, to upgrade your exisiting sponge based Nexus.

The Nexus Eazy 300 retro kit inlcudes all the necessary parts, plus 45 litres of Kaldnes media, to upgrade your exisiting sponge based Nexus.

The exit has been changed so that the fine particles are trapped in a more efficient manner and are a lot easier to clean and purge to waste. The resulting clarity is incredible!

Water Polisher And Air Backwash Kit comprises of the following components:

• Stainless steel exit plate
• Air-valve with “T” connector
• “D-Plate”
• Pipe clips & fixings
• Plastic weir-plate
• Backwash Air-tube

The improvement adds a full height metal plate (instead of the half plate) and a plastic weir after it. This new design utilises the whole pack of static K1. This maximises the cleaning potential and gives great results. Equally as exciting is the air backwash kit which is part of this improvement.  No more sponge to rinse off. 

Just as easy to clean as the EAZY!  Simply turn on the air valve and the cleaning process begins without getting your hands wet.

For use with the NeXus Eazy 200 and NeXus Eazy 300. 

This kit is often forgot about until the end of the instalation, why not order it at the same time as your Nexus Eazy 200 or Nexus Eazy 300, it will save you time and delivery costs.

The kit includes everything to connect to the 1.5 inch Pressure Ball Valve and 3/4 inch Pressure Ball Valve already supplied with your Nexus Eazy Filter.

This will allow you to drain the inner Nexus Eazy Chamber down and the 3/4 inch Ball valve which will enable you to drain the outer Biological Kaldnes Chamber down, if you ever needed to that is.

This kits makes life alot easier and cleverly brings both waste outlets on the Nexus Eazy Filter in to just the one waste Outlet!