4040 Low Pressure Commercial Reverse Osmosis RO Membrane
4040 Low Pressure Commercial Reverse Osmosis RO Membrane elements are made from the highest quality membrane material, manufactured by Toray. This is ideal for use with GRP fibreglass, stainless steel or Champ 40 inch commercial RO housings. Designed and manufactured using Toray advanced polymer membrane technology, providing the some of the industry's most reliable and best performing reverse osmosis elements. Toray are a leading Japanese reverse osmosis membrane manufacturer.
4040 Low Pressure Commercial Reverse Osmosis RO Membrane elements are made from the highest quality membrane material, manufactured by Toray. This is ideal for use with GRP fibreglass, stainless steel or Champ 40 inch commercial RO housings. Designed and manufactured using Toray advanced polymer membrane technology, providing the some of the industry's most reliable and best performing reverse osmosis elements. Toray are a leading Japanese reverse osmosis membrane manufacturer.
These membranes are manufactured in China by a wholly owned American company that has recently received NSF accreditation across all its products. NSF is the most respected highest international standard. This company is the largest supplier of water products in China. We are proud to tell you these are assembled to the highest standard in China.
XLE-4040 = 10,600 litres (2,335 UK/gallons) per day, at a pressure of 100 psi. This membrane will provide the equivalent output to a HF-4 membrane, and is cheaper as well. This is under optimum output conditions.
Reasonable Expectations
Unlike many other companies, we would like to provide information as to a reasonable expectations. Fact: unless your input water is heated to 24 °C, and pumped with a pressure of 100psi, and other water factors you won't achieve the stated gallons per day.
UK water temperature is around 12 °C, and if you have a pressure of around 55 psi, you will approximately achieve in excess of 2 litres per minute (over 120 litres hour); that is around 2,800 litres per day. If you increase your pressure, you can expect a higher output. We assemble systems many times every week, and this is what we achieve straight from our pre-filters connected to the water mains when we test systems.
If you are going to pump your water, please ensure that your pump has sufficient water flow and pressure. Beware - there are many "water-movers"; low wattage, low pressure, high volume pumps. You need a pump that will provide around 5 litres per minute at a pressure of 80 to 100 psi constantly.
Technical Specifications
- Active area in ft2 (m2): 87 (8.1)
- Applied Pressure in psi (bar): 100(6.9)
- Permeate flow rate in gpd (m3 /d): 2,800 (10.6)
- Stabilised salt rejection (99%): 99.0
Standard Delivery Monday to Friday, via DPD or APC
You will receive from our courier tracking details once your item has been despatched, please ensure you check your email / mobile number to monitor your parcel in transit.
Delivery costs for standard items in the UK - £5.95
(Surcharges do apply to remote postcodes)
Heavy items - £9.95
Pipe - £14.95
Larger items:
Palletised items - Some large oversize products, typically items weighing more than 30kg, may require delivery via pallet. Standard Pallet charge is approx. £50.00. To ensure there are no delays with delivery, please include a contact number when placing the order.
Overseas – DHL and UPS, cost based on weight / volume at checkout.
Damages
Although we check that items we send are in good condition before despatched and are packed well to prevent damage, it is sometimes inevitable that the occasional item will get broken in transit.
Should this happen, please let us know within 24 hours of receiving your parcel. We will ask you to email us providing some images of the damage so we can address this with the courier.
We will arrange for a replacement to be sent out to you as quickly as possible, free of charge.
